Check Valves

Inline

• Design Pressure (DP) / Maximum abnormal pressure (MAP): 700 psig, 48 bar
• Continuous operating temperature (COT): -40°F/300°F, -40°C/149°C
• Pressure to open: < 1 psi • UL/cUL Recognized, Conforms to Pressure Equipment Directive 2014/68/EU • Neoprene seat for positive isolation and pulsation dampening • Enhanced internal design for maximum flow and minimum pressure drop[/et_pb_text][/et_pb_column_inner][/et_pb_row_inner][et_pb_row_inner admin_label="Row"][et_pb_column_inner type="4_4" saved_specialty_column_type="1_2"][et_pb_text _builder_version="3.0.92" background_layout="light"]

90° Angle

• Design Pressure (DP) / Maximum abnormal pressure (MAP): 700 psig, 48 bar
• Continuous operating temperature (COT): -40°F/300°F, -40°C/149°C
• UL/cUL Recognized, Conforms to Pressure Equipment Directive 2014/68/EU
• 100% tested
• Forged brass body exceeds the most stringent quality standards in the industry
• Neoprene gasket

Magnetic

• Design Pressure (DP) / Maximum abnormal pressure (MAP): Up to 800 psig, 55 bar
• Continuous operating temperature (COT): -40°F/300°F, -40°C/149°C
• UL/cUL Recognized, Conforms to Pressure Equipment Directive 2014/68/EU
• Built-in 30 mesh stainless steel screen
• Internal components installed with DuraForm Technology
• Mechanically formed solder cup stops for easy installation
• Flexible for installation in vertical or horizontal position
• Hermetically formed solid copper body assures zero leak potential

Four-Bolt

• Design Pressure (DP) / Maximum abnormal pressure (MAP): 700 psig, 48 bar
• Continuous operating temperature (COT): -40°F/300°F, -40°C/149°C
• UL/cUL Recognized, Conforms to Pressure Equipment Directive 2014/68/EU
• 100% tested
• Horizontal or vertical installation (not to be installed with bonnet facing down)
• “Y” type design provides minimal pressure drop and increased flow capacity
• Design features easy removal and reassembly of internal components
• Forged brass body exceeds the most stringent quality standards in the industry

Piston

• Design Pressure (DP) / Maximum abnormal pressure (MAP): Up to 1305 psig
• Continuous operating temperature (COT): -40°F/300°F, -40°C/149°C
• UL/cUL Recognized, Conforms to Pressure Equipment Directive 2014/68/EU
• Enhanced internal design for maximum flow and minimum pressure drop
• 1/4″ – 1/2″ sized valves are designed for use with R744 (CO2)
• 5/8″ – 7/8″ sized valves are designed for use with R744 in cascading systems or secondary loops where design pressures are below the R744 critical pressure of 1058 psi

Plumbing
Refrigeration
ACR / Med Tube
Industrial
Factory Coated
Line Sets
Mini-Splits
PE
Press Fittings
Refrigeration Valves
Wrot Copper Fittings